Citroen Pressure Plate for Sale in South Africa

It is normally bought as part of a kit rather than alone, and pricing is competitive locally — Valeo kits for the C5 run R3,500 to R4,500, and the Millennium kit covering the C2, Xsara and C5 is R2,895. Pro Citroen Spares and our supplier network stock both. Buying the plate separately is possible but rarely sensible, for the reason set out below.

Judder on take-off is the signature, and it is usually worse once the car is warm because heat is what distorted the diaphragm in the first place. Slipping under load and a burnt smell follow as the clamping force falls away. On the C3 and Xsara the cause is nearly always sustained hard clutch use rather than mileage — a city car worked hard gets there long before a highway car does.

Warped diaphragm fingers grip in stutters instead of progressively, so the disc grabs and releases as the plate settles. That is the common cause. The other one is contamination: oil from a weeping rear main or gearbox input seal reaching the friction face produces identical judder on a clutch that is otherwise fine. Both need the gearbox out, and if it is oil, that seal must be replaced or the new clutch goes the same way.

Fit the full kit, every time. The plate, the friction disc and the release bearing have done identical work and are at identical points in their lives, so replacing one of three means the other two fail within a year and the gearbox comes out again. Since the labour dwarfs the parts and is the same either way, kit pricing beats piecemeal replacement by a wide margin.

Aftermarket kits for the C2, Xsara and C5 are around R2,086, with Valeo kits for the C5 at R3,500 to R4,500. Fitted at an independent, budget R5,950 to R10,500 all in. If your car has a dual-mass flywheel, have it measured while the gearbox is out and budget for the possibility of replacing it before you start rather than being surprised mid-job. Send the engine code for a quote.