Citroen Camshafts for Sale in South Africa

A C3 with a PureTech petrol runs R8,750-R15,750 with parts and labour. An HDi diesel in a Xsara or C3 Aircross is R11,900-R23,100, because the timing arrangement is more involved and there is more to remove and reset. Those figures include the camshaft, the timing components that have to come off to reach it, gaskets and an oil change. On an older car it is always worth pricing a good used cylinder head against a camshaft replacement — sometimes the whole assembly is the cheaper route, and we can quote both.

Oil, in four different ways. The wrong specification, so the additive package does not protect under load. Intervals stretched past 15,000 km, so what is in the sump is no longer oil in any useful sense. A stretched timing chain letting the cam drift out of phase, which is the known weak point on these engines and announces itself as a cold-start rattle. And carbon build-up around the variable timing hardware, which these direct-injection engines are prone to. Correct-specification 5W30 on a short interval addresses three of those four, which is a good return for the cost of an oil service.

There is no interval, because a healthy camshaft does not need one. Inspect it when something else already has the engine open — at a major service around 60,000 km if the cam cover is off anyway, and always at a timing belt change, since the covers are off and looking costs nothing. What deserves immediate attention rather than a scheduled one is a new ticking noise from the top of the engine, or a cam-position fault code. Both mean something has already moved, and both get more expensive with distance.

Not sensibly. A worn lobe means one valve is no longer opening properly, so that cylinder is down on power and running an incorrect mixture, and the debris coming off the lobe is circulating through the oil system into everything else. If the timing has slipped rather than the lobe worn, you are one step from valve-to-piston contact. Either way the noise or the fault code is the cheap warning. A full rebuild once it has gone runs R41,600-R80,000, so the inspection is not the expensive part of this decision.

The HDi diesels are fundamentally durable, and camshaft wear is not a headline fault. Where it does appear, oil dilution is usually behind it: repeated interrupted particulate filter regenerations put unburnt diesel into the sump, the oil thins, and thin oil is poor protection for a cam lobe. That is a short-trip driving problem more than an engine design problem. Sticking to 10,000 km oil changes with the correct ACEA C2 or C3 specification oil, and letting the car do a proper run often enough to complete a regeneration, keeps it out of trouble.